Model POC 2500
2 1/2″ capacity
300 lbs
The POC 2500 is available in electric or air versions and can be activated by any electric, gasoline, hand, battery, or air operated hydraulic pump capable of developing 10,000 psi and having free flow return through the pressure line. The pumps are then hose-connected to the Hydrashear body.
The POC 2500 can cut as many pieces of wire rope as can be gathered into the shearblade (designed to accept up to and including 2 1/2″ diamter Super Plow steel wire rope.)
Optional mounting of POC 2500: Mounted on a base plate and skids for shipping. Dimensions: steel base palte 13 1/2″ wide x 42″ long; overall height 21″. Power: 1.7hp; 115 or 230 volt; 50/60 HZ motor.
* All Morse-Starrett and Pell Hydrashear wire rope cutters are designed for new and unused wire rope.
Cutter Resources:
Click diagram to enlarge
| Part no. | Description |
|---|---|
| 1 | Die set |
| 4 | Blade |
| 5 | Blade Pin |
| 6 | Hinge pin |
| 7 | Ram |
| 8 | Ram collar |
| 10 | Retracting spring |
| 13 | Ram retainer screw |
| 14 | Cup leather |
| 15 | Cup retainer |
| 33 | Latch |
| 35 | Ram collar screw |
| 38 | Latch pin w/#39 |
| 39 | Snap ring |
| 40 | Guard screw |
| 42 | Guard plate |
| 43 | Shear blade holder |
| 55 | 1/4″ NPT street elbow |
| 59 | 1/4″ NPT directional valve |
| POC2500–62 | Repair Kit |
| POC2500–80 | Cutting head (2 1/2″ | 85 lbs) |
| POC2500–81 | Pump |
| POC2500–82 | Hose |
| POC2500–83 | Base Plate |
| POC2500–94 | Complete Unit (300 lbs) |